10 mm x 30 mm x 9 mm Fersa 6200-2RS deep groove ball bearings

Fatigue load limit Pu:31 kN; T:36.512 mm; d1 ≈:109.8 mm; Da min.:120 mm; db min.:96.5 mm; d:82.55 mm; Limiting speed:4500 r/min; ra max.:3.5 mm; D:139.992 mm; C:28.575 mm;

d:65 mm; Axial load factor Y:0.6; Fatigue load limit Pu:25.5 kN; Reference speed:5300 r/min; B:33 mm; Basic dynamic load rating C:212 kN; r1,2 min.:2.1 mm; Limiting speed:9500 r/min; D1 ≈:118.1 mm; Mass bearing:2.69 kg;

Basic Dynamic Radial Load Rating C:62400 N; D:150.0000 mm; B:24.00 mm; Fillet Radius rb:0.60 mm; Basic Static Radial Load Rating Co:68000 N; d:100.000 mm; Grease Speed Rating n1:0 rpm; Oil Speed Rating n2:4500 rpm; Fillet Radius ra:1.50 mm;

B1:73 mm; Da max.:171 mm; d1:115 mm; Calculation factor e:0.3; G:M 125x2; Calculation factor Y2:3.4; Calculation factor Y1:2.3; Basic dynamic load rating C:456 kN; G1:13 mm; B2 ≈:82 mm;

A5:27.781 mm; Attachment bolt diameter G:12.7 mm; s:25.4 mm; A:57.15 mm; Basic dynamic load rating C:77 kN; A6:19.05 mm; S:0.794 mm; d2:68.659 mm; A1:75.406 mm; da:44.45 mm;

rs (min):1 mm; Grease:7 100 min-1; B:23.8 mm; Dynamic (Cr):30.998 kN; Bearing designation:3206  ; a:41 mm; Pu:1.232 kN; da:35 min; d:30 mm; Da:56 max;

Basic dynamic load rating C:69.5 kN; Fw:44 mm; Limiting speed:12000 r/min; Calculation factor kr:0.2; Mass bearing:0.31 kg; Limiting value e:0.3; ra max.:1 mm; Fatigue load limit Pu:8.15 kN; Axial load factor Y:0.4; r1,2 min.:1.1 mm;

Dimension B:104.8 mm; Dimension H:25.4 mm; Dimension S1:22.2 mm; Basic Static Radial Load Rating Co:11200 N; Dimension G:12.7 mm; Basic Dynamic Radial Load Rating:15600 N; Dimension C:88.9 mm; Pin Dia A1:6.4 mm; Weight W:0.50 kg; Dimension N:19.8 mm;

Fatigue load limit Pu:345 kN; K:12 mm; B1:188 mm; B2:45 mm; D:540 mm; Ba min.:14 mm; Calculation factor e:0.23; ra max.:4 mm; b:22.3 mm; d1:340 mm;

Mass pillow block:111 kg; A1:158.75 mm; Cap bolt recommended tightening torque:359.3 N·m; dc:153.988 mm; da:160 mm; J min.:441.325 mm; Lock washer:W 32; P60°:226 kN; PosiTrac Plus contact element (dc shaft position):B10724-140; Pa:49.8 kN;

Basic Interchange FAF:-; Basic Radial Load Rating-Static SCO:8000 N; Basic Radial Load Rating-Dynamic DC:14000 N; Basic Interchange NDH:488505; Fillet Radius ra:1.00 mm; Basic Interchange BCA:-; Width - Inner Ring B1:16.70 mm; Width - Outer Ring B0:15.0 mm; Speed Rating-Single and Double Sealed Grea

Taconite seal:TER 186; P60°:121 kN; Da:160 mm; Max. speed for Taconite seal:950 r/min; J min.:260.35 mm; ba:34.925 mm; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; H:192.484 mm; h:38.1 mm;

Oil Speed Rating n2:28000 rpm; B:10.00 mm; Fillet Radius rb:0.30 mm; Basic Static Radial Load Rating Co:3900 N; Fillet Radius ra:0.64 mm; Basic Dynamic Radial Load Rating C:8190 N; D:32.0000 mm; d:12.000 mm; Grease Speed Rating n1:22000 rpm;

ba:57.944 mm; Adapter sleeve assembly:SNW 26x4.1/2; h:60.325 mm; R1:79.375 mm; Bearing limiting speed:3600 r/min; Mass pillow block:85.7 kg; Initial grease fill:382.73 g; PG:1/4 NPT; Cap bolt:3/4-10 UNC; Stabilizing ring:SR-26-0;

D:160.0000 mm; Grease Speed Rating n1:2600 rpm; Basic Static Radial Load Rating Co:208000 N; Accessories:One Seal & Snap-Ring; Sealed Speed Rating n3:2600 rpm; Oil Speed Rating n2:3600 rpm; d:75.000 mm; Basic Dynamic Radial Load Rating C:187000 N; Fillet Radius ra:2.00 mm; B:68.30 mm;