angular contact ball bearings

Contact Now

Angular contact ball thrust bearings are designed to accommodate both radial and thrust loads with their large thrust carrying capacity being the primary design feature. These bearings are inch series and typically have an angle of contact around 50 degrees. Angular contact ball thrust bearings consist of hardened and ground angular contact plates with dowel pin holes for mounting and a brass cage with precision balls. The single ball path AB series can handle thrust load in one direction only. Largely used at the bottom of vertical shaft applications, this design accommodates large thrust loads while providing center alignment for the shaft. Specific applications are indexing tables and oilfield rotary table bearings.


Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.An angular contact bearing is a type of specialty ball bearing used in many manufacturing and industrial applications. This relatively small device is designed to support a greater range of forces than a standard bearing, and to work within even the most precisely engineered machines and equipment.Angular Contact Ball Bearings. Angular contact bearings from Grainger can support combined loads simultaneously in radial and axial directions. Use them for high-speed, high-precision applications, such as turbines and dentistry equipment, where dual-direction loads are present.


37 mm x 72 mm x 37 mm Fersa F16030 angular contact ball bearings

MSM70BR 67443 lbf
0.7 in 5.8 in

107,95 mm x 222,25 mm x 44,45 mm SIGMA QJM 4.1/4 angular contact ball bearings

+0 / 0.40 ASTB90 F26570
45 265 0.190 / 0.242

70 mm x 180 mm x 79,38 mm SIGMA 5414 angular contact ball bearings

MB13 252 mm
259 28 mm

10 mm x 35 mm x 11 mm ZEN S7300B angular contact ball bearings

400 kN 120 mm
253 mm 55 mm

35 mm x 80 mm x 34,9 mm ZEN 3307-2RS angular contact ball bearings

22,45 mm 28

10 mm x 30 mm x 9 mm ZEN 7200B angular contact ball bearings

320 693 kN
440 56

50 mm x 90 mm x 30,162 mm FBJ 5210ZZ angular contact ball bearings

5434 713610040
R154.35 CX116

30 mm x 72 mm x 19 mm FBJ QJ306 angular contact ball bearings

0.0020 in QAAFL15A300SB
0.0031 49900 lb

75 mm x 160 mm x 68,3 mm FBJ 5315-2RS angular contact ball bearings

120 mm 29,794 mm
483/472 120

130 mm x 230 mm x 40 mm CYSD 7226DF angular contact ball bearings

No 28000 r/min
0.03 16 mm

45 mm x 100 mm x 25 mm CYSD 7309DB angular contact ball bearings

75 JNS
1 mm 25